Since temperature affects the measuring accuracy of a pressure sensor, there always remains a small temperature error in the rated temperature range despite a variety of compensation measures. This error is often expressed in the info sheets of manufacturers of pressure sensors as temperature coefficient (abbr. TC). This coefficient describes a (linear) error, starting from a reference point, which in most cases is room temperature.
Accordingly, Rare at room temperature is zero and increases with increasing difference of the temperature from room temperature with the specified coefficient in linear fashion (see figure). Basically, not only the zero-point temperature coefficient (abbr. Comprehensive ), but also that of the span (TCC) must be taken into account individually. The zero-point error describes the effect of temperature on the zero signal. The error of the span specifies the result of temperature on the full scale value. The individual temperature coefficients of zero point and of span are often specified as magnitudes, meaning that they may be either positive or negative.
If within an individual instrument the zero-point error gets the same sign because the error of the span, these two temperature errors may add up in worst case. A typical value for the common zero-point temperature coefficient of a pressure sensor is: 0.2 % / 10 K. Link to WIKA pressure sensors.