The Turbinator from Knowsley SK – Always providing precision proportioning

In- เกจวัดแรง pushed foam proportioning pumps have become increasingly more popular in the last decade. Their low pressure drop and correct foam proportioning over a wide range of flows are needed in many methods. But this technology just isn’t simple: the gear available on the market until nows fairly difficult and delicate to contamination and over speeding. The new Turbinator water driven foam proportioning pump developed by Knowsley SK effectively solves these problems, making this technology the popular selection for a variety of fire preventing systems.
Precision proportioning – Always

The Turbinator is a optimistic displacement foam proportioning pump designed for Fixed and Mobile purposes. The unit is pushed by a particular volumetric water motor which is immediately coupled to a precision gear foam pump. Because each parts of the Turbinator are constructive displacement units, the ratio of foam focus to firewater is mounted over the full working range. This makes Turbinator the best proportioning technology for systems with different flows, corresponding to multi-legged deluge systems, sprinkler methods and cellular massive incident gear.
The Turbinator unit doesn’t require organising or on-site adjustment – the proportioning price is achieved at any move price and stress within the working vary.
MAXI Turbinator installed on fastened skid feeding foam pouring systems on storage tanks and bunds.
Technology built to final – Forever

With Turbinator technology, Knowsley introduced a flexible, abrasion resistant paddle materials in the water motor which gives the unit its distinctive wear traits. The ordinary contamination current in fire water doesn’t harm the paddles. Overspeed up to 120% of the nominal circulate, which might happen during routinely controlled activation of enormous techniques, does not harm the unit. In addition, the Turbinator resists dry operating in accordance with NFPA20.
Design and set up: Simple as 1-2-3

The close-coupled design offers a very compact and efficient set up with simply three connections: fire water inlet (1), foam concentrate inlet (2) and foam solution outlet (3). The unit could be installed immediately into vertical or horizontal piping techniques. The Turbinator foam pump delivers 3m suction height simply, which makes it possible to put in the froth focus tank beneath the unit set up stage – even with excessive viscosity concentrates in arctic circumstances (thick foams). Simple, cost efficient atmospheric foam tanks are fine for Turbinator.
With its distinctive low differential stress, Turbinator fits in probably the most sophisticated systems, even when lengthy pipe runs or static strain loss are involved. Turbinator doesn’t require exterior power supply or control circuits and is safe for any ATEX surroundings.
The Turbinator is on the market in 3 sizes from 500 l/min to 12’000 l/min with proportioning of 1% and 3% with freshwater and saltwater development. Each Turbinator in-built our Manchester, UK manufacturing facility is 100 percent functionally examined on a excessive circulate test rig through its complete working range ensuring performance at all times.
For more info, go to


Leave a Comment