Swoon ?dissipation loss? are available in the info sheet for a pressure sensor or pressure transmitter. One needs this specification to become in a position to protect the pressure sensor from overheating.
In case a pressure sensor is operated in a hot environment, it really is necessary to limit its electrical power. If Security neglects this aspect, one possibly risks an overheating and with this, in the worst case, a total failure of the instrument. So how can the correct electrical connection be managed?
Determination of the right electrical connection on the basis of the dissipation loss
First, the utmost permissible electrical power for the pressure sensor should be known. This is given in the info sheet because the dissipation loss. Please note that the dissipation loss can be dependent upon the maximum expected operating temperature of the instrument and should be calculated where necessary.
If the allowable dissipation loss has been determined correctly, then the actual maximum electrical energy for the pressure sensor occurring could be determined. The determination can be carried out expediently in two steps:
1. Determination of the voltage at the pressure transmitter using the following formula:
UPressure transmitter = UVoltage source ? RLoad � Imax. Current supply
2. Calculation of the maximum electrical power for the pressure transmitter through the following equation:
PPressure transmitter = UPressure transmitter � Imax. Current supply
The maximum electrical power for the pressure transmitter (PPressure transmitter), which is now known, must be smaller compared to the permissible dissipation loss. If this is the case, both the power (UVoltage source) and the load (RLoad) were properly calculated and the electrical energy of the pressure sensor will be within the permissible range under all operating conditions. Consequently, the pressure transmitter won’t heat too strongly and will withstand the mandatory operating temperatures.
Note
In the event you need any advice, your contact will gladly assist you to.